Dial indicator | VINACOMM

Đồng hồ so (10)

Sản phẩm HOT

Máy ép kiện thủy lực KS-1100

Tìm theo từ khóa Dial indicator (10)

Xem dạng lưới

Đồng hồ so, Dial indicator, TM-101

Đồng hồ so, Dial indicator, TM-101,Teclock ...

Bảo hành : 12 tháng

Đồng hồ so, Dial indicator, TM-135

As outer frame diameter is small ( minimum diameter : 36mm),this is suitable for production line with narrow set up space and to measure many points with machines put in.Lift lever can be adopted ( excluding TM-34)Line up of measuring range 3.5mm, ...

Bảo hành : 12 tháng

Đồng hồ so, Dial indicator, TM-1201

Standard gauge of scale interval 0.001mm and outer frame diameter 56mmProtection and durability of mechanism parts like gear are pursued by impact release mechanism( shock proof ).Jewel axis is applied to improve durability.Stable repeated precision ...

Bảo hành : 12 tháng

Đồng hồ so, Dial indicator, TM-121

Long stroke dial gauge of measuring range 20mm, 30mm.Shock proof mechanism is adopted to all models.Lift lever can be also adopted. (excluding KM-121PW) ...

Bảo hành : 12 tháng

Đồng hồ so, Dial indicator, KM-55

Long stroke dial gauge of which scale mark plate is large as 50mm, 100mm and 150mm.Measuring up to 150mm stroke is realized with precision parts of high durability and TECLOCK original enlargement mechanism. ...

Bảo hành : 12 tháng

Đồng hồ so, Dial indicator, TM-1200

This is less than 1 revolution dial gauge and effective for comparative measurement with scale interval 0.001mm, and 0.01mm.High durability is materialized by adopting TECLOCK original enlargement mechanism.Measuring range is subdivided for 0.08mm, 0 ...

Bảo hành : 12 tháng

Đồng hồ so, Dial indicator, TM-91

This is the dial gauge of scale interval 0.1mm.There are 3 types such as 10mm, 20mm and 30mm complying with measurement range.This is used to measure approximate dimension for wooden work and leather products or to judge deviance dimension. ...

Bảo hành : 12 tháng

Đồng hồ so, Dial indicator,TM-110LM85-1A

This is circularity measurement dial gauge used to measure various power like pressure, pulling etc.Scale interval 0.01mm and 0.005mm are available. ...

Bảo hành : 12 tháng

Đồng hồ so, Dial indicator, ST-306A

This differs from general dial gauges and its scale plate is set parallel against measured face . This is convenient to make smooth surface horizontal and read from front face of measured point. ...

Bảo hành : 12 tháng

Đồng hồ so, Dial indicator, LT-310

Measuring direction can be changed by switch over lever.Main bearing is jewel bearing for all kinds of machines.Edge of gauge head is ultra hard ball with less abrasion.Gauge head is made of φ2mm stainless and can be easily changed, as this is fitted ...

Bảo hành : 12 tháng

TP.HCM

TP. Hà Nội