Thông số kỹ thuật

Bảo hành	12 tháng

Đặc điểm nổi bật

Features - Operates independent of a controller - Direct digital readout on backlit LCD - Available for LEL, H2S, CO, and O2 - 4-20 mA & digital Modbus outputs standard - Non-intrusive calibration via magnetic wand - 2 fully programmable alarm relays

Features
- Operates independent of a controller
- Direct digital readout on backlit LCD
- Available for LEL, H2S, CO, and O2
- 4-20 mA & digital Modbus outputs standard
- Non-intrusive calibration via magnetic wand
- 2 fully programmable alarm relays & fail relay
- H2 specific LEL version available
- Infrared combustible version available
- Patented water repellent sensor coating
- User friendly setup push buttons & LCD menus
- CSA, and/or UL approved
Industry Applications
- Petrochemical plants
- Refineries
- Offshore drilling platforms
- Water & wastewater treatment plants
- Offshore oil rigs
- Pulp & paper mills
- Gas, telephone, & electric utilities
- Parking garages
- Manufacturing facilities
- Steel
- Automotive

Weather Resistant	Patented water repellent sensor coating (*Except for 65-2613RK and 65-2614RK)
Outputs
Analog	4-20 mA signal, into 500 ohms impedance max, corresponding to 0 - full scale
Digital	Modbus RTU output standard, fully configurable, 2-wire RS-485, 1200 to 19.2k baud
Alarms
Alarm Settings	Fully programmable alarm setpoints, increasing / decreasing, latching / self-resetting, on delays, off delays, normally energized or de-energized, programmable deadband, programmable smoothing filter
Alarm Indication	Visual LEDs. Alarm 1, Amber; Alarm 2, Red; Fail, Red
Relays	5 amp form C contacts for alarm 1, alarm 2, and fail
Physical
Dimensions	Height: 8.5 (215 mm), Width: 5.2 (132 mm), Depth: 4.5 (114 mm)
Display	Alphanumeric display with backlighting. 8 characters per line; 2 lines for gas concentration readout, plus user-friendly calibration and setup
Enclosure	Explosion proof for Class I, Div 1, Groups B, C, D.
Enclosure Rating	NEMA 4, explosion proof, watertight, cast aluminum with o-ring seal and epoxy powder coating
Controls	Magnet used for calibration functions. Calibrates without opening the housing. Internal push-button controls also available for calibration and setup
Operating Environment
Operating Temperature	-4°F ~ 122°F (-20°C ~ 50°C)
Relative Humidity	5 - 95% RH non-condensing
Location	Indoor or outdoor. Explosion proof for Class I, Div. 1, Groups B, C, and D. (Oxygen available in non XP version also)
Operating Voltage	19 VDC - 30 VDC