Thông số kỹ thuật

Bảo hành	12 tháng

Đặc điểm nổi bật

CRT Type 6-inch rectangular type with internal graticule 8 x 10 div (1div=1cm) Accelerating Potential 2kV Z-Axis Input Sensitivity: Above 5Vp-p Max. input voltage: 30V (DC + AC peak) Bandwidth: DC ~ 2MHz Polarity Positive-going input decrease Focus

CRT
Type	6-inch rectangular type with internal graticule 8 x 10 div (1div=1cm)
Accelerating Potential	2kV
Z-Axis Input	Sensitivity: Above 5Vp-p Max. input voltage: 30V (DC + AC peak) Bandwidth: DC ~ 2MHz
Polarity	Positive-going input decrease
Focus Control	Auto focus
FUNCTION GENERATOR
Frequency Range	0.1Hz ~ 1MHz (7 range)
Waveform	Sine Wave, Square Wave, Triangle Wave
Frequency Variable Range	10:1 or more
Output Impedance	50Ω±10%
Voltage	Over 14Vpp(open circuit) continuous conversion DC offset possible over ±6V when open
Sinewave Distortion	2% Max. (10Hz ~ 100kHz)
Squarewave Unsymmetry	±3% or less (in 1 kHz maximum)
Squarewave Rise/Fall Time	50Ω output: 120ns or less
VERTICAL SYSTEM
Sensitivity	5mV ~ 5V/div ±3%, 1mV ~ 1V/div ±5% (using x5MAG)
Bandwidth	DC to 20MHz (x 5MAG: DC to 7MHz)
Rise Time	Approx. 17.5ns (x 5MAG: Approx. 50ns)
Max. Input	300V (DC+ACpeak) at 1kHz
Input Coupling	AC, DC, GND
Input Impedance	Approx. 1MΩ // 25pF
Vertical Mode	CH1,CH2,DUAL(ALT,CHOP),ADD,CH2 INV
HORIZONTAL SYSTEM
Sweep Time	0.2μs ~ 0.5s/div ±3% (±5% at x10 MAG)
Max. Sweep Rate	100ns/div (20ns and 50ns/div are uncalibrated)
TRIGGER
Trigger Mode	AUTO, NORM, TV-V, TV-H
Trigger Source	CH1, CH2, ALT, LINE, EXT
Trigger Slope	"+" or "-"
X-Y OPERATION
Sensitivity	5mV ~ 5V/div ±4%
X-axis Bandwidth	DC ~ 500kHz
Phase Error	3° or less from DC ~ 50kHz
OUTPUT SIGNAL
Ch1 Signal Output	Voltage: approx. 20mV/div into 50Ω Bandwidth : 50Hz to 5MHz (-3dB) Impedance : Approx.50Ω
Calibrator Output	1kHz Square wave, 2Vpp±2%
POWER SOURCE
	AC 115/ 230V ±15%, 50Hz /60Hz
DIMENSIONS & WEIGHT
	310(W) x 150(H) x 455(D)mm; Approx. 8.5kg