Cảm ơn Quý khách đã quan tâm đến sản phẩm của VINACOMM. Kính chúc Quý khách sức khỏe, thành công và nhiều may mắn!
Gọi mua hàng0926 575 555 Tra cứuđơn hàng Giỏ hàng

Máy dò kim loại Anritsu KDS7025ADW

Mã: KDS7025ADW Đánh giá Hỏi đáp
Bảo hành
12 tháng
Liên hệ
Giá tốt nhất theo thời điểm — đặt hàng, gọi hoặc chat để được báo giá.
Tình trạng: Còn hàng

Thông số kỹ thuật

Bảo hành12 tháng

Đặc điểm nổi bật

ModelKDS7025ADWPass height250 mmMaximum pass width700 mmBelt width600 mmDisplay7-inch color TFT LCDOperation methodTouch panel (Start, Stop, and Home are direct push buttons)Preset memoryMaximum 200Product packagingBoth general and aluminum
Model
KDS7025ADW
Pass height
250 mm
Maximum pass width
700 mm
Belt width
600 mm
Display
7-inch color TFT LCD
Operation method
Touch panel (Start, Stop, and Home are direct push buttons)
Preset memory
Maximum 200
Product packaging
Both general and aluminum-evaporated-packaging products
Detection method
Simultaneous 2-frequency magnetization detection method
Belt speed1
26 m/min (50 Hz), 31 m/min (60 Hz)
Maximum product weight2
Maximum 50 kg
Metal detection
Rejection signal output and beep, or belt stop and beep
Power supply3
100 Vac ± 10%, single phase, 50/60 Hz; 110 Vac ± 10%, 115 Vac ± 10%, 120 Vac ± 10%, single phase, 60 Hz; 200 Vac ± 10%, 220 Vac ± 10%, 230 Vac ± 10%, single phase, 50/60 Hz; or 240 Vac ± 10%, single phase, 50 Hz
Power consumption
400 VA, rush current 50 A (typ.) (20 ms or less)
Maximum mass
205 kg
Environmental conditions
0 °C to 40 °C, relative humidity 30% to 85%, non-condensing
Protection class
IP66 compliance
Exterior
stainless steel (SUS304)

Đánh giá Máy dò kim loại Anritsu KDS7025ADW

Chưa có đánh giá
Hãy là người đầu tiên chia sẻ cảm nhận.
5 0 đánh giá
4 0 đánh giá
3 0 đánh giá
2 0 đánh giá
1 0 đánh giá

Đánh giá sản phẩm

Máy dò kim loại Anritsu KDS7025ADW
Đánh giá chung *
Nhập số điện thoại hoặc email (1 trong 2) — không hiển thị công khai.

Hỏi và đáp