GDS-
2062/2064
|
GDS-
2102/2104
|
GDS-
2202/2204
|
VERTICAL |
Channels |
2 / 4
|
2 / 4
|
2 / 4
|
Bandwidth |
DC
~ 60MHz (-3dB)
|
DC
~ 100MHz (-3dB)
|
DC
~ 200MHz (-3dB)
|
Rise Time |
5.8ns Approx.
|
3.5ns Approx.
|
1.75ns Approx.
|
Sensitivity |
2mV/div ~ 5V/div (1-2-5 increments) |
Accuracy |
±(3% x |Readout|+0.05 div x Volts/div+0.8mV) |
Input Coupling |
AC, DC & Ground |
Input Impedance |
1MΩ±2%, ~16pF |
Polarity |
Normal & Invert |
Maximum Input |
300V (DC+AC peak), CATII |
Waveform Signal Process |
+ , - , FFT |
Offset Range
|
2mV/div ~ 20mV/div : ±0.5V
50mV/div ~ 200mV/div : ±5V
500mV/div ~ 2V/div : ±50V
5V/div : ±300V |
Bandwidth Limit |
20MHz (-3dB) |
TRIGGER |
Sources |
CH1 , CH2 , CH3 , CH4 , Line |
Modes |
Auto-Level, Auto, Normal, Single, TV, Edge, Pulse Width |
Coupling |
AC , DC , LF rej. , HF rej. , Noise rej. |
Sensitivity |
DC ~ 25MHz : Approx. 0.5div or 5mV
25MHz ~ 200MHz : Approx. 1div or 10mV |
HORIZONTAL |
Range |
1ns/div ~ 10s/div (1-2-5 increments)
ROLL : 250ms/div ~ 10s/div |
Modes |
Main, Window, Window Zoom, Roll, Scan, X-Y |
Accuracy |
±0.01% |
Pre-Trigger |
20 div maximum |
Post-Trigger |
1000 div |
X-Y MODE |
X-Axis Input |
Channel 1 |
Y-Axis Input |
Channel 2 |
Phase Shift |
±3° at 100kHz |
SIGNAL ACQUISITION |
Real-Time Sample Rate |
1GSa/s maximum |
Equivalent Sample Rate |
25GSa/s maximum |
Vertical Resolution |
8 Bits |
Record Length |
25K Points maximum |
Acquisition Mode |
Normal, Peak Detect, Average |
Peak Detection |
10ns |
Average |
2 , 4 , 8 , 16 , 32 , 64 , 128 , 256 |
CURSORS AND MEASUREMENT |
Voltage Measurement |
Vpp , Vamp , Vavg , Vrms , Vhi , Vlo , Vmax , Vmin , Rise Preshoot/ Overshoot , Fall Preshoot/Overshoot |
Time Measurement |
Freq , Period , Rise Time , Fall Time , Positive Width , Negative Width , Duty Cycle |
Delay Measurement |
Eight types of delay measurement |
Cursors Measurement |
Voltage difference between cursors (ΔV) Time difference between cursors (ΔT) |
Auto Counter
|
Resolution : 6 digits
Accuracy : ±2%
Signal Source: All available trigger source except the Video trigger mode
|
CONTROL PANEL FUNCTION |
Autoset |
Automatically adjusts Vertical VOLTS/DIV, Horizontal TIME/DIV, and Trigger level |
Save Setup |
Up to 20 sets of measurement conditions |
Save Waveform |
24 sets of waveform |
DISPLAY |
TFT LCD Type |
5.6 inch |
Display Resolution |
234 (Vertically) x 320 (Horizontally) Dots |
Display Graticule |
8 x 10 divisions ; 8 x 12 divisions (menu off) |
Display Brightness |
Adjustable |
INTERFACE |
Go/NoGo Output |
5V Maximum/10mA TTL Open Collector Output |
RS-232 Interface |
DB 9-pin male DTE RS-232 interface |
GPIB Interface (Option) |
Fully programmable with IEEE 488.2 compliance |
USB |
USB Host/Device 2.0 full speed supported |
POWER SOURCE |
Line Voltage Range |
AC 100V ~ 240V , 48Hz ~ 63Hz , Auto selection |
Battery Power(Option)
|
Battery : 10.8V Li-Ion battery pack
Charge Time : 8 hours (Power ON)
Operating Time : 3 hours , depending on operating condition |
MISCELLANEOUS |
Multi-Language Menu |
Available |
Online Help |
Available |
Time Clock |
Time and Date, Provide the Date/Time for saved data |
DIMENSIONS & WEIGHT |
|
310(W) x 142(H) x 254(D) mm; Approx. 4.3kg |