Model
|
GX-500
|
GX-400
|
GX-300
|
Mechanism / Driving method
|
Friction feed / Digital control servo motor
|
Maximum cutting area
|
Width: 1195 mm (47 in.)
Length: 24998 mm (984-1/8 in.)
|
Width: 1000 mm (39 in.)
Length: 24998 mm (984-1/8 in.)
|
Width: 737 mm (29 in.)
Length: 24998 mm (984-1/8 in.)
|
Acceptable media widths
|
Min. 90 mm (3-1/2 in.)
Max. 1372 mm (54 in.)
|
Min. 90 mm (3-1/2 in.)
Max. 1178 mm (46 in.)
|
Min. 50 mm (2 in.)/Max. 915 mm (36 in.)
(50 to 540 mm (2 in. to 21 in.),
582 to 915 mm (23 in. to 36 in.))
|
Width of material that can be cut off
|
0 to 1270 mm (0 in. to 50 in.)
|
0 to 1067 mm (0 in. to 42 in.)
|
0 to 812 mm (0 in. to 32 in.)
|
Tools
|
Special blade for CAMM-1 series
|
Maximum cutting speed
|
During cutting: 850 mm/sec. (in all directions) During
tool-up: 1202 mm/sec. (in 45 direction)
|
Cutting speed / Blade force
|
10 to 850 mm/sec. (in increments of 10 mm/sec.) / 20 to
350 gf
|
Mechanical resolution
|
0.0125 mm/step (0.000492 in./step)
|
Software resolution
|
0.025 mm/step (0.000984 in./step)
|
Distance accuracy (*1)
|
Error of less than ± 0.2% of distance traveled, or 0.1 mm
(0.00394 in.), whichever is greater
|
Repetition accuracy (*1) (*2) (*3)
|
0.1 mm or less
|
Interface
|
Serial (RS-232C-compatible), USB (Rev 1.1)
|
Replot memory
|
2 MB (buffer size: 8 MB)
|
Power supply / Power consumption
|
AC 100V to 240V ± 10% 50/60 Hz 1.2A / Approx. 100W
|
AC 100V to 240V ±10% 50/60 Hz 1.1A / Approx. 95W
|
Dimensions with stand
|
1602 mm (W) x 727 mm (D) x 1113 mm (H)
(63-1/16 in. (W) x 28-5/8 in. (D) x 43-13/16 in. (H))
|
1407 mm (W) x 727 mm (D) x 1113 mm (H)
(55-3/8 in. (W) x 28-5/8 in. (D) x 43-13/16 in. (H))
|
1144 mm (W) x 727 mm (D) x 1113 mm (H)
(45-1/16 in. (W) x 28-5/8 in. (D) x 43-13/16 in. (H))
|
Weight with stand
|
55 kg (121.2 lb.)
|
51 kg (112.4 lb.)
|
44 kg (97 lb.)
|
Included items
|
Power cord, blade holder (XD-CH2), pin, blade, alignment tool,
cable clamp, replacement blade for sheet cutter, USB cable, Roland software
CD-ROM, setup guide, user's manual
|